Representative kit image; DCM models have a similar appearance.
2 MP imaging with a maximum hardware resolution of 1600 × 1200 pixels. Connect to your microscope and computer for image capture with ScopePhoto software.
Shipping is calculated at checkout.
Listed software support: Windows 2000 / XP (SP2). Confirm compatibility with your computer and microscope before ordering.
*Frame rate depends on the computer.
View specificationsThe camera uses a 23.2 mm mounting barrel for an ocular tube or trinocular port. Included 30 mm and 30.5 mm adapters support stereo microscope mounting. The supplied USB cable is 1.5 m long.
ScopePhoto supports image capture and processing. White balance and exposure offer automatic and manual control; image size, brightness, gain and exposure time are adjustable.
| Model | DCMC200 |
|---|---|
| Image sensor | 1/3 inch CMOS |
| Pixel size | 2.8 × 2.8 µm |
| Sensitivity | 1.0 V/lux-sec at 550 nm |
| Maximum hardware resolution | 1600 × 1200 (2 MP) |
| Frame rate at maximum resolution | 6 fps; depends on computer |
| Dynamic range | 71.5 dB |
| Spectral range | 400–650 nm, IR-cut filter |
| Exposure mode | Electronic Rolling Snap (ERS) |
| White balance and exposure | Automatic / manual |
| Connection | USB 2.0, 480 Mb/s |
| Power | USB |
| Adjustable controls | Image size, brightness, gain and exposure time |
| Mount | 23.2 mm ocular/trinocular barrel; C/CS mount listed |
| Included adapters | 30 mm and 30.5 mm |
| USB cable | 1.5 m |
| Software | ScopePhoto; DirectShow and TWAIN driver interfaces |
| Listed operating systems | Windows 2000 and XP (SP2) |