View and compare signals with two measurement channels, DC to 60 MHz bandwidth and a dedicated external trigger input. The EM6560 supports waveform inspection, circuit troubleshooting and X-Y measurements.
Shipping is calculated at checkout.
Choose AC, ground or DC input coupling and Auto, Normal, TV-V or TV-H trigger modes. Rising- and falling-edge triggering help stabilize the waveform display. X-Y operation uses channel 1 for the horizontal axis and channel 2 for the vertical axis.
| Model | EM6560 |
|---|---|
| Type | 60 MHz, 2-channel analog oscilloscope |
| Inputs | Two measurement channels and one external trigger input |
| Bandwidth | DC to 60 MHz |
| Vertical sensitivity | 5 mV to 20 V |
| Input coupling | AC, GND, DC |
| Input impedance | 1 megohm / 30 pF |
| Time base | 0.1 microsecond to 0.2 second/div |
| Trigger modes | Auto, Normal, TV-V, TV-H |
| Trigger coupling | AC, DC |
| Trigger slope | Rising or falling edge |
| External trigger input impedance | 1 megohm |
| X-Y inputs | X: CH1; Y: CH2 |
| X-axis bandwidth | DC to 500 kHz (-3 dB) |
| Reference signal | 1 kHz, 0.5 Vp-p rectangular wave |
| Power supply | 110 VAC |
| Power consumption | 45 W |
| Unit dimensions | 316 x 132 x 410 mm |